How To Paint Metal Furniture With A Brush

Trying to apply each coat thicker will likely result in runs forming on your metal patio furniture.

How to paint metal furniture with a brush. Scrape off any loose paint and rust with a wire brush. Best way to paint metal furniture. Previously painted surfaces should be abraded to provide a key.

The brush fills all of the areas assuring good coverage and the roller removes the brush marks. You want those ridges from your brush strokes to flatten out going side-to-side. Try to put the same pressure in every stroke.

If you want a smoother look I recommend watering down the paint. Apply a thin coat of primer. But when doing larger pieces I wait a few hours then I apply the second coat.

When you paint up and down with a brush those vertical brush lines just stay there as nothing allows them to spread out into each other. To prep metal for paint adhesion you must first clean it with soap and water remove light rust with a wire brush sand it with fine-grain sandpaper and then in most cases prime. Wipe the metal with a damp cloth to get any dust or debris off of the surface then let it air dry.

Hold the can about 12 in 30 cm away from the surface and keep the can in continuous motion. Use a brush or roller or use a spray paint formulated for application on metal manufacturers like Rust-Oleum and Krylon offer all surface spray paint in numerous colors and sheens. Keep repeating consistently in the same method until you have coated the whole area of the metal surface with the.

Allow five to 10 minutes for the mineral spirits to evaporate. For applying the oil based paint use a 1 foam brush to avoid brush strokes as much as possible. Paint the furniture with a good brush in small sections.